Gap below 200mm, use inflatable bags with a width of over 500mm
Gap below 300mm, use inflatable bags with a width of over 800mm
Gap below 400mm, use inflatable bags with a width of over 1000mm
Gap below 500mm, use inflatable bags with a width of 1200mm
Other precautions:
1. The length of an inflatable bag is generally the minimum height of the gap to be filled minus 10CM, and the maximum length minus 40CM is appropriate.
2. When using an inflatable bag, first put it into the gap before inflating it. Inflation should not be too full, and it is sufficient to see that the inflatable bag has already squeezed the goods tightly. Because we are operating at most times, it is at room temperature. During sea transportation, the temperature inside the container may reach up to 70 ℃, and overcharging may lead to adverse consequences.
3. The bottom of the inflatable bag should not touch the floor to avoid air leakage caused by friction and damage between the inflatable bag and the container floor during container transportation.
4. Avoid direct contact of inflatable bags with sharp corners, protrusions, or sharp edges. Corrugated cardboard can be used to protect areas with burrs.
5. If the gap is too large and the existing inflatable bag does not meet the filling conditions, the gap can be dispersed on both sides to avoid the situation where the contact area between the inflatable bag and the goods is too small, causing explosion or damage due to excessive inflation. Observing the tray beginning to shift during the inflation process indicates that the inflation has reached the requirements and should not be further inflated. Or if it feels more difficult to insert the palm between the inflatable bag and the cargo, it also indicates that the inflation is sufficient. But the most important thing is to choose the appropriate size inflatable bag.
6. After inflation, be sure to confirm again whether the cover of the air nozzle is tightened. Often, the main reason for air leakage is that the cover is not tightened. At the same time, the black handle should be pulled insert the stopper into the air nozzle for dual protection.
7. Use the specialized metal inflation gun provided by our company. When inflating, do not unscrew the cover of the air nozzle and inflate directly into the bag to avoid high pressure the airflow damages the inner bag and causes air leakage.
